Horizontal Stitching 117
3
Press (“Reverse/Reinforcement Stitch”
button).
Hold (“Reverse/Reinforcement Stitch”
button) pressed until the stitching reaches the
upper-left corner.
X The fabric is fed forward.
After you have sewn to the corner, stop the
sewing machine, and then select stitch
69
.
Start sewing.
X The fabric is fed to the left.
After you have sewn to the corner, stop the
sewing machine, and then select stitch
1
again.
After sewing 3 to 5 stitches at the beginning of
the stitching, stop the sewing machine.
Memo
z The feeding direction of the fabric differs
depending on the stitch that is selected. Be
sure to guide the fabric while it is sewn.
To Next Page
Loading...
