124
UTILITY STITCHES
Partially removing threads is called “drawnwork”.
This gives a beautiful result with fabrics that have a
loose weave.
Two ways to create drawnwork are described below.
■ Drawnwork (Example 1)
Pull out several threads from the fabric.
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 42).
Select stitch
39
.
• For details, refer to “Selecting stitching” (page
49).
With the right side of the fabric facing up, sew
along the right edge of the frayed section.
Press on the LCD.
X The pattern displayed at the top of the screen
is mirrored.
Sew along the other edge of the frayed section
so that it looks like the previous stitching.
Press , and set the horizontal mirror
image key back to OFF.
N
N
To Next Page
Loading...
