Attaching the Embroidery Foot 143
4
Removing the embroidery foot
Press (“Needle Position” button) once or
twice to raise the needle.
a “Needle Position” button
Turn off the sewing machine.
Raise the presser foot lever.
a Presser foot lever
X The presser foot is raised.
While pressing in the lever at the back of the
embroidery foot with your finger, loosen the
presser foot holder screw, and then remove
embroidery foot “Q”.
Turn the screwdriver toward the back.
Attach the presser foot holder.
• For details, refer to “Attaching the presser
foot holder” (page 44).
1
a
To Next Page
Loading...
