Baby Lock Ellure PLUS BLR3 - Transferring Embroidery Patterns from the Computer to Machine

Using the Memory Function 175
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Transferring embroidery patterns
from the computer to machine
Note
z Only a USB flash drive (USB flash memory)
can be connected to the USB port on this
machine.
z An embroidery pattern can be transferred to
the machine from USB media containing
data for no more than 200 embroidery
patterns.
z Embroidery patterns cannot be transferred to
the machine if the USB media contains data
for more than 200 embroidery patterns. In
this case, reduce the number of designs
saved on the USB media.
z In addition, if the embroidery designs
contain too many colors (this number may
vary within the designs themselves), it may
not be possible to transfer an embroidery
pattern to the machine, even if there are less
than 200 embroidery patterns that have been
saved on the USB media. If this occurs you
will also need to reduce the number of
designs saved on the USB media.
z Save the patterns in the root directory of the
USB media. If embroidery data is saved in a
folder on USB media, that embroidery data
cannot be retrieved by the machine.
a
Insert the USB media into the USB port on the
computer.
a USB port on the computer
b USB media
b
The “Removable Disk” icon appears in
“Computer (My computer)” on the computer.
c
Copy the pattern data to “Removable Disk”.
d
Safely remove the USB media from the USB
port on the computer. (Refer to “Caution”
(page 176))
a USB port on the computer
b USB media