Baby Lock Ellure PLUS BLR3 - Checking Machine Operating Procedures

LCD (Liquid Crystal Display) Operation 21
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d
When settings are complete, press
(Back key).
X The initial screen appears again.
Note
z Settings that are changed are not lost when
the power is turned off.
Checking machine operating
procedures
Displays simple explanations of setting upper thread /
bobbin winding / setting bobbin thread / needle
replacement / embroidery unit attachment /
embroidery frame attachment / embroidery foot
attachment / presser foot replacement on the LCD.
a
Turn on the sewing machine.
X The LCD comes on.
b
Press / (Sewing machine help key)
on the operation panel.
X The sewing machine help screen appears.
c
Press the item to be displayed.
a Upper threading
b Bobbin winding
c Bobbin installation
d Needle replacement
e Embroidery unit attachment
f Embroidery frame attachment
g Embroidery foot attachment
h Presser foot replacement
X The first screen describing the procedure for
the selected topic appears.
• Pressing (Back key), returns you to the
item selection screen.
6
5
1
234
8
7