Baby Lock imagine wave BLE3ATW - Blind Hemming

2
T
H
R
E
A
D
O
V
E
R
L
O
C
K
29
Blind Hemming
Ｈ
A
B
C
D
You Baby Lock Imagine Wave can create a sturdy, nearly invisible
blindhem.
1. Set the machine for 2-Thread Overlock with the right needle
threaded. Set the stitch width at 5.0 and the stitch length at 4.0
in the standard range.
2. Fold up the hemline and press it in place. Then fold the hem
allowance back against the fabric right side to create a fold
about 1/4 " from the top edge of the hem as shown (fig. A).
3. Align the fold under the presser foot and stitch, allowing the nee-
dle to catch only a thread or two of the soft fold: the blade will
trim the top edge of the hem and the loopers will overcast the
edge for a clean finish (fig. B).
4. Open the fold and press flat (fig. C).
Note: An optional blindhem foot for consistent guiding is available
through your Baby Lock retailer (fig. D).
See page 7 Optional
Accessories listing for part number.