Baby Lock PRESTO - Inserting a Piping

Zipper/piping Insertion
Sewing S-25
UTILITY STITCHES
S
h
Topstitch around the zipper.
1 Stitching
2 Right side of fabric
3 Basting stitching
4 End of zipper opening
i
Remove the basting stitching.
Inserting a piping
a
Place the piping between two layers of fabric, right
sides together, as shown below.
1 Fabric
2 Piping
3 Fabric
b
Refer to the steps of attaching the adjustable zipper/
piping foot on page S-24.
c
Sew along the piping.
d
After sewing, turn them over.
CAUTION
• When sewing, be sure that the needle does not
touch the zipper, otherwise the needle may
bend or break.
1
2
3
4
1
2
3