5 PRESSER FOOT ADJUSTMENT
The pressure on your Baby Lock presser foot has been pre – adjusted at the factory and rarely needs
adjustment. For very thick fabrics you might find it necessary to decrease the pressure on the presser
foot in order for it to accommodate the thickness of the fabric and feed through smoothly. To release the
pressure, with a coin, turn the presser adjuster
screw counterclockwise. To return the pressure
on the pressure foot to its normal setting, turn
the pressure adjuster screw clockwise.
5 – 1 Tape guide slot in presser foot
The tape guide slot in the presser foot is
designed to guide a stabilizing tape or a narrow
elastic into the stitching. Insert the tape or elastic
through the slot and under the back of the foot.
Adjust the stitch width to match the width of the
tape.
Insert the fabric and stitch.
14
Downloaded from www.Manualsoncd.com
To Next Page
Loading...
