Put the empty bobbin on the bobbin winder shaft.
Push the bobbin winder switch to the left.
Press the " " button to wind the bobbin.
The LED light will be on while the bobbin is
winding.
Bobbin can wind in any operation mode.
12
Key lock button
Press the " " button to lock the Function and
Selection buttons. Press the " " button again
to unlock. Lock buttons to prevent stitch settings
from accidentally being changed.
Attention: While the key lock button is locked
the Function and Selection buttons cannot be
operated.
FUNC
Bobbin winding button
Elongation button
Group 2-B Patterns 58-75 can be elongated up to
five times its normal length by pressing the " "
button, the LED light will turn on.
Combine different stitches in this group : change
width or length for a greater variety of patterns.
To Next Page
Loading...
