Baby Lock Quest BLQ2 - To disengage the PDQ system; Fabric positioning

Pull down PDQ mechanism and swing it to
the rear to disengage.
the
Push PDQ mechanism up.the
To disengage the PDQ system
Raise the presser foot.
36
Fabric positioning
Place fabric flat on top of needle plate and position
the fabric under presser foot.
While holding the thread tails with left hand turn
handwheel with right hand to insert the needle
into the fabric. Lower the presser foot and make
3-4 stitches.
Place hands on each side of the presser foot
and gently guide the fabric while sewing.