Baby Lock Quest BLQ2 - BLIND HEM; LINGERIE STITCH

1. Fold the fabric as illustrated with the wrong
side facing up.
2. Attach the blind hem foot.
Place the fabric under the foot.
Turn the handwheel towards you by hand until
the needle swings fully to the left. It should
just pierce the fold of the fabric. If it does not,
adjust the stitch width or guide on the presser
foot accordingly.
3. Adjust the guide (b) by turning the knob (a) so
that the guide just rests against the folded
edge of the fabric and the needle just barely
catches the fold as you sew.
4. Sew slowly, guiding the fabric carefully along
the edge of the guide.
5. Turn the fabric over.
16:
19:
20:
Blind hem/ lingerie for firm fabrics
Blind hem for stretch fabrics
Blind hem for stretch fabrics
BLIND HEM/ LINGERIE STITCH
BLIND HEM/ LINGERIE STITCH
2.5~6.0
1.0~5.0
Note: It takes practice to sew blind hems.
Always make a sewing test first.
RM
51
1
3
a
b
5
2
4
3.5~6.0
1.0~3.0
RM
Note: If the stitches are too visible on the
right side of the fabric, decrease the width
of the stitch or move the guide to the right.
If the stitches are not catching the fold of
the fabric, increase the width or move the
guide to the left.
5mm
Overcasting
stitches
5mm
Wrong side Wrong side