Baby Lock Regalia ST BLRG20ST User Manual (English)

Questions and Answers:

L
Lisa MillerAug 18, 2025
What to do if the needle breaks on my Baby Lock Regalia ST BLRG20ST Sewing Machine Accessories?
- R
  Ryan WhiteAug 18, 2025
  If the needle breaks on your Baby Lock Sewing Machine Accessories, it might be bent or not installed correctly. Replace the needle, ensuring it's pushed fully into the needle bar clamp. Visually confirm it reaches the top of the sight hole above the needle bar clamp screw. Also, the needle could be hitting the throat plate. Correctly position the needle, throat plate, or hopping foot, and replace the needle.
B
benjaminmillerAug 21, 2025
Why does my Baby Lock Regalia ST BLRG20ST have poor stitch quality?
- M
  Michael WilliamsAug 21, 2025
  Poor stitch quality on your Baby Lock Sewing Machine Accessories can stem from a few issues. The tension might not be balanced, so ensure the bobbin tension is correctly adjusted before balancing the needle thread tension. A damaged, corroded, or dirty bobbin case can also cause problems; make sure it’s free of lint or foreign matter. If using Manual mode, moving the fabric too fast for the selected needle speed can result in elongated stitches; synchronize fabric movement and needle speed.
R
Robin MartinAug 25, 2025
Why are the stitches puckered when using my Baby Lock Regalia ST BLRG20ST Sewing Machine Accessories?
- R
  Rachel GarciaAug 25, 2025
  Puckered stitches on your Baby Lock Sewing Machine Accessories could be due to unbalanced tension. Balance the needle thread tension after ensuring the bobbin tension is correctly adjusted. Alternatively, the needle might be too large for the quilting fabric. Try replacing it with a more suitable size.
J
Jorge WarnerAug 28, 2025
What to do if thread nests under the quilt with my Baby Lock Sewing Machine Accessories?
- K
  Kenneth TateAug 28, 2025
  If thread nests under the quilt when using your Baby Lock Sewing Machine Accessories, it may be due to not enough tension on the top thread. Check that the machine is threaded correctly, ensuring the thread is flossed snugly between the tension discs. If correctly threaded, tighten the top tension by rotating the tension knob clockwise. Improper threading can also cause this issue; refer to the threading diagram and instructions.
C
Crystal MartinAug 31, 2025
What causes thread backlash on Baby Lock Sewing Machine Accessories?
- D
  Dennis JohnsonAug 31, 2025
  Thread backlash on your Baby Lock Sewing Machine Accessories occurs when the bobbin thread tangles within the bobbin case, winds onto the hook spindle, or forms loops on the quilt's bottom. Ensure the bobbin is correctly placed in the bobbin case, with the thread coming out from under the tension spring. The bobbin should rotate clockwise when the thread is pulled.
L
Laurie PhillipsSep 3, 2025
Why won't the hand wheel rotate on my Baby Lock Sewing Machine Accessories?
- M
  Matthew JohnsonSep 4, 2025
  If the hand wheel won’t rotate on your Baby Lock Sewing Machine Accessories, thread may be entangled in the hook. With the machine on, use the onscreen handwheel to break the thread lock by quickly moving your finger down and up several times. If that doesn't work, turn the machine off and use the handwheel at the back to resolve the lock. Carefully rock the handwheel in both directions until the thread lock breaks free. Remove the thread, re-oil the hook, and ensure the handwheel turns freely without the hook hitting the needle. A thread lock can sometimes cause timing issues.
D
debrahamptonSep 7, 2025
What to do if my Baby Lock Sewing Machine Accessories motor fails to run?
- D
  David JacksonSep 7, 2025
  If the motor fails to run on your Baby Lock Sewing Machine Accessories, first ensure both power switches are on. Turn on the rear power switch to the "|" position, then turn on the power button on the front-left side of the machine. Also, check that the power connector cord is securely plugged into the back of the machine and the three-prong end is plugged into the power source.
M
mperezSep 12, 2025
Why does the thread keep breaking on my Baby Lock Sewing Machine Accessories?
- V
  Virginia CannonSep 12, 2025
  Thread breakage on your Baby Lock Sewing Machine Accessories can occur if the thread is of poor quality or has severe twisting or thread rot. Check for severe twisting when about 12 to 15 inches of thread is pulled off and the ends are pinched together. Cotton threads are susceptible to dry or wet rot, making them brittle. Avoid using poor quality, rotted, or brittle thread. Unbalanced top and bobbin tensions can also cause thread breakage. Balance the needle thread tension after ensuring the bobbin tension is correctly adjusted.

Baby Lock Regalia ST BLRG20ST Specifications

General

Brand	Baby Lock
Model	Regalia ST BLRG20ST
LCD Screen	Yes
USB Port	Yes
Lighting	LED
Needle Threader	Automatic

Summary

How to Use this Manual

Special Information

Explains icons like NOTE, IMPORTANT, CAUTION, and QUILTING TIP used in the manual.

Finding Information

Guides users on how to locate specific topics and information within the manual.

Important Safety Information

DANGER

Safety warnings specifically related to the risk of electric shock.

WARNING

Safety warnings concerning risks of burns, fire, electric shock, or personal injury.

About Your Machine

General Specifications

Lists the technical specifications and features of the Regalia ST quilting machine.

Get to Know Your Regalia ST

Side View

Diagram identifying key components of the machine as seen from the side.

Close-up View of Needle Area

Detailed illustration highlighting specific parts around the sewing needle.

Right Side

Close-up of Tension Assembly

Machine Connections

Installation and Setup

Installing the Power Cord

Step-by-step instructions for connecting the machine's power cord.

Installing the Foot Pedal

Guide on how to properly connect and position the foot pedal.

Installing the Thread Mast

Instructions for attaching the thread mast assembly to the machine.

Using Your Machine

Power Switch

Explanation of the machine's main and secondary power switches.

Lighting

Details on the machine's built-in lighting system for visibility.

Machine Needle

To change the needle

Step-by-step instructions for safely removing and replacing the sewing needle.

Hopping Feet

To change the hopping foot

Guide on how to switch between the different hopping feet.

Bobbin and Bobbin Tension

To wind the bobbin

Instructions for using the separate bobbin winder.

To insert the bobbin into the bobbin case

To test bobbin tension

To adjust the bobbin tension

To insert the bobbin case into the machine

Tension

To adjust the top tension

Tension Quick Start Guide

Threading the Machine

Quilting with the Regalia ST

Preparing to Quilt

Essential steps to take before starting a quilting project.

Using the Touchscreen Displays

Overview of the Main Screen

Description of the main interface elements and their functions.

Start/Stop buttons

Needle-stop button

Reset-bobbin button

To use the on-screen handwheel

Stitching Modes

Manual Stitching Mode

Setting and using stitches-per-minute in manual mode.

Stitch Regulation Mode

To use Cruise stitch regulation

Instructions for operating the machine in Cruise stitch regulation mode.

To use Precision stitch regulation

Instructions for operating the machine in Precision stitch regulation mode.

Basting Mode

To baste a quilt

Guide on selecting and using basting stitch options.

Toolbar Options

Controlling the Lights

How to adjust the machine's lighting settings via the toolbar.

Quilting Timer, Alarm, and Stitch Counter

To track how much time you spend on a quilt

Using the quilting timer to measure active stitching time.

To track the number of stitches in a quilt

To set the quilting alarm

On-screen Calculator

To update the machine's software

To update the display software

Quick-Set Tension™ Reset

Diagnostics

Machine Settings

Low-bobbin alarms

Configuring notifications for when bobbin thread is running low.

Turn on or off laser lights

Controls for activating or deactivating the pinpoint needle laser.

Configure alarms

General settings for managing various audible alarms.

Set Language

Option to change the display language of the machine interface.

Low-Bobbin Alarm

To add new bobbin configuration and record bobbin capacity

Setting up custom low-bobbin alarms for different thread types.

To delete a low-bobbin configuration

To edit a low-bobbin configuration

Pinpoint Needle Laser

To turn the laser on or off

Instructions for activating or deactivating the needle laser.

Alarms

Low-bobbin alarm

Alerts when bobbin thread is running low.

Thread-break alarm

Alerts when the top thread breaks during operation.

Over-speed alarm

Alerts if fabric movement exceeds machine capacity.

Configure alarms

General settings for managing various machine alerts.

To turn on or off alarms

Simple method to toggle alarms between active and inactive states.

Set Language

To select a language

Procedure for changing the user interface language.

Information Screens

To see the needle and thread chart

On-screen reference for matching needle sizes with thread weights.

To see the machine threading diagram

Visual guide showing the correct path for threading the machine.

Machine Maintenance

Clean and Oil Your Regalia

Routine cleaning and lubrication procedures for the machine.

To clean the bobbin area and oil the bobbin hook

Specific steps for oiling the critical bobbin hook assembly.

To clean the touchscreen display

Maintenance Schedule

Troubleshooting

Skipped Stitches

Corrective measures for common skipped stitch issues.

Baby Lock Regalia ST BLRG20ST User Manual

Table of Contents

Questions and Answers:

Baby Lock Regalia ST BLRG20ST Specifications

Summary

How to Use this Manual

Special Information

Finding Information

Important Safety Information

DANGER

WARNING

About Your Machine

General Specifications

Get to Know Your Regalia ST

Side View

Close-up View of Needle Area

Right Side

Close-up of Tension Assembly

Machine Connections

Installation and Setup

Installing the Power Cord

Installing the Foot Pedal

Installing the Thread Mast

Using Your Machine

Power Switch

Lighting

Machine Needle

To change the needle

Hopping Feet

To change the hopping foot

Bobbin and Bobbin Tension

To wind the bobbin

To insert the bobbin into the bobbin case

To test bobbin tension

To adjust the bobbin tension

To insert the bobbin case into the machine

Tension

To adjust the top tension

Tension Quick Start Guide

Threading the Machine

Quilting with the Regalia ST

Preparing to Quilt

Using the Touchscreen Displays

Overview of the Main Screen

Start/Stop buttons

Needle-stop button

Reset-bobbin button

To use the on-screen handwheel

Stitching Modes

Manual Stitching Mode

Stitch Regulation Mode

To use Cruise stitch regulation

To use Precision stitch regulation

Basting Mode

To baste a quilt

Toolbar Options

Controlling the Lights

Quilting Timer, Alarm, and Stitch Counter

To track how much time you spend on a quilt

To track the number of stitches in a quilt

To set the quilting alarm

On-screen Calculator

To update the machine's software

To update the display software

Quick-Set Tension™ Reset

Diagnostics

Machine Settings

Low-bobbin alarms

Turn on or off laser lights

Configure alarms

Set Language

Low-Bobbin Alarm

To add new bobbin configuration and record bobbin capacity

To delete a low-bobbin configuration

To edit a low-bobbin configuration

Pinpoint Needle Laser

To turn the laser on or off

Alarms

Low-bobbin alarm

Thread-break alarm