SEWING THE STITCHES
134
c
Use a chalk pencil to mark on the fabric
about 5 mm (3/16 inch) from the edge of
the fabric, and then baste it.
d
Fold back the fabric inside along the
basting.
e
Unfold the edge of fabric, and position the
fabric with the wrong side facing up.
f
Attach blind stitch foot “R”.
g
Select or .
h
Remove the flat bed attachment to use the
free-arm.
i
Slide the item that you wish to sew onto the
free arm, make sure that the fabric feeds
correctly, and then start sewing.
a Free arm
j
Position the fabric with the edge of the
folded hem against the guide of the presser
foot, and then lower the presser foot lever.
a Wrong side of fabric
b Fold of hem
c Guide
k
Adjust the stitch width until the needle
slightly catches the fold of the hem.
a Needle drop point
When you change the needle drop point, raise the
needle, and then change the stitch width.
<Stitch Width>
a Thick fabric
b Normal fabric
a Wrong side of fabric
b Right side of fabric
c Edge of fabric
d Desired edge of hem
e 5 mm (3/16 inch)
f Basting
<Thick fabric>
<Normal fabric>
<Seen from the side>
a Wrong side of fabric
b Right side of fabric
c Edge of fabric
d Desired edge of hem
e 5 mm (3/16 inch)
f Basting
g Basting point
<Thick fabric>
<Normal fabric>
<Seen from the side>
a Wrong side of fabric
b Right side of fabric
c Edge of fabric
d Desired edge of hem
e Basting point
f Basting
<Thick fabric>
<Normal fabric>
<Seen from the side>
1
2
1
2
3
5
6
4
1
2
1
3
6
5
1
1
2
7
4