EMBROIDERY APPLICATIONS
105
Advanced Editing
3
c
Specify the distance between the pattern
and the appliqué outline, and then touch
.
The pattern and appliqué outline are grouped.
d
Touch .
The steps for creating the appliqué piece are added
to the embroidering order.
e
Fuse or stick a piece of stabilizer to the
back of the felt or denim fabric to be used
as the appliqué piece.
f
Hoop the appliqué fabric in the embroidery
frame, attach the embroidery frame to the
machine, and then start embroidering.
g
After the pattern is embroidered, thread the
machine with the thread for the cutting
line, and then sew the cutting line
(APPLIQUE MATERIAL).
a Cutting line for appliqué
h
Remove the appliqué material from the
embroidery frame, and then carefully cut
along the stitching. After cutting, carefully
remove all of the cutting line thread.
• Three steps are added to the embroidering
order: appliqué cutting line, position of pattern
placement on the garment, and appliqué
stitching.
a Cutting line for appliqué
b Position of pattern placement on garment
c Appliqué stitching
• When setting the [Thread color] to [#123]
(thread number) in the settings screen, the
following screen is displayed.
• An appliqué piece cannot be created if the
pattern is too large or too complicated or a
combined pattern is separated. Even if the
selected pattern fits within the embroidering
area, the entire appliqué pattern may exceed
the embroidering area when the outline is
added. If an error message appears, select a
different pattern or edit it.
• We recommend using thread for the cutting
line that is closest to the color of the fabric.
To Next Page
Loading...
