Baby Lock Solaris VISION BLSA3 - CHANGING THE PRESSER FOOT

CHANGING THE PRESSER FOOT
9
Embroidery Step by Step
1
Removing the Presser Foot
a
Press the “Needle Position” button to raise
the needle.
b
Touch to lock all keys and buttons.
* If the message [OK to automatically lower the
presser foot?] appears on the LCD screen, touch
to continue.
c
Raise the presser foot lever.
d
Press the black button on the presser foot
holder and remove the presser foot.
a Black button
b Presser foot holder
e
Loosen the screw of the presser foot holder
to remove the presser foot holder.
a Multi-purpose screwdriver
b Presser foot holder screw
c Presser foot holder
CHANGING THE PRESSER FOOT
CAUTION
• Always touch on the screen to lock all
keys and buttons before changing the presser
foot. If is not touched and the “Start/
Stop” button or another button is pressed, the
machine will start and may cause injury.
IMPORTANT
• Use presser feet made for this machine.
b
a