Baby Lock Solaris VISION BLSA3 - Embroidering a Quilting Pattern Across the Entire Fabric (Edge-To-Edge Quilt Function)

EMBROIDERY APPLICATIONS
117
Advanced Editing
3
c
After specifying the stitch settings for the
stippling, touch .
a The stippling is added within the area of the
selected frame size. If the pattern is larger than the
selected frame size, the area indicating the frame
size will appear in gray, and stippling will not be
added.
b Specify the distance from the outline of the pattern
to the stippling.
c Specify the spacing for the stippling.
* Touch in the stippling settings screen to create
an echo quilting pattern.
* Touch in the stippling settings screen to create
a decorative fill pattern.
a Echo quilting pattern
b Decorative fill pattern
Embroidering a Quilting Pattern
Across the Entire Fabric (Edge-to-
Edge Quilt Function)
Connect quilting patterns to embroider from edge
to edge of a specified area. By rehooping a large
piece of fabric, you can continue embroidering the
quilting pattern across the entire fabric.
■ Creating Edge-to-Edge Quilt Data
a
Determine the area of the fabric to be
embroidered, and then draw a line around
it with a chalk pencil. Measure the width
and height.
a Embroidering area
b
Touch , and then touch .
ab
a
b
c
Note
• Make sure that the chalk pencil line is within
the embroidering area when the fabric is
hooped.
a