Baby Lock Solaris VISION BLSA3 - Page 126

EMBROIDERY APPLICATIONS
124
c
Select the quilt border pattern, and then
touch .
d
Select how to divide the pattern. For this
example, select “Auto split quilt sash”.
a Auto split quilt sash
b Semi-Auto split quilt sash
For details, refer to “Embroidering Quilting Border
Patterns (Semi-Auto Split Quilt Sash)” on
page 126
e
Specify the size of embroidery frame to be
used. Enter values for the width and height
of the sash and quilting border, and then
touch . After entering all three values,
touch .
a Embroidery frame size
b Width
c Height
d Quilting border width
* To clear the value, touch .
 The pattern appears with the specified settings
applied.
f
Check the split pattern, and then touch
.
a You can change the thread color.
b Select single stitching or triple stitching.
 The data for the split embroidery pattern is saved on
the machine.
g
To embroider the pattern, touch .
Note
• The size of item that can be created differs
depending on the type of split that was
selected. Check the layout of “Auto split quilt
sash”, and then select “Semi-Auto split quilt
sash” if the layout did not appear as desired.
a b
d
c
b
a
Memo
• The data for the split embroidery pattern
cannot be saved on external media such as
USB media.
a
b