Baby Lock Solaris VISION BLSA3 - Using the Camera to Connect Patterns; Connecting Three Patterns

USING THE CAMERA TO CONNECT PATTERNS
140
Instead of using thread marks, the camera can be
used to connect patterns in the embroidery screen.
Select the appropriate frame depending on the size
of the embroidery. The distance between the
pattern and the embroidery area of the frame must
be at least 3 cm (1-3/16 inches). The small
embroidery frame (2 cm × 6 cm (1 inch × 2-1/2
inches)) cannot be used with the camera function.
Connecting Three Patterns
Example:
a Pattern A
b Pattern B
c Pattern C
a
Select the first pattern A, and then touch
.
* To select the desired frame, refer to “Selecting
Frame Patterns” on page 41.
b
Thread the machine with the upper thread
and the bobbin thread.
c
Hoop fabric in the 18 cm × 13 cm (7-1/8
inches × 5-1/8 inches) embroidery frame,
and then attach the frame to the machine.
d
Touch to display the embroidery
screen.
e
Touch .
f
Touch .
 appears at the bottom right of the screen, and
then changes to .
g
Lower the embroidery foot, and then
embroider the first pattern.
h
After embroidering of the first pattern is
finished, the following message appears.
Touch .
USING THE CAMERA TO CONNECT PATTERNS
Memo
• can be touched while embroidering.
• A pattern cannot be saved in the machine’s
memory while patterns are being connected.