PREPARING THE FABRIC
31
Embroidery Step by Step
1
Embroidering Small Fabrics or
Fabric Edges
Use an embroidery stabilizer to provide extra
support. We recommend using a stabilizer for all
embroidery. After embroidering, remove the
stabilizer carefully. Attach the stabilizer as shown
in the following examples.
■ Embroidering Small Fabrics
Use a temporary spray adhesive to adhere the small
piece of fabric to the larger piece in the frame.
If you do not wish to use a temporary spray
adhesive, attach the stabilizer with a basting stitch.
a Fabric
b Stabilizer
■ Embroidering Edges or Corners
Use temporary spray adhesive to attach the fabric to
the stabilizer, and then hoop the fabric.
If you do not wish to use a temporary spray
adhesive, attach the stabilizer with a basting stitch.
a Fabric
b Stabilizer
■ Embroidering Ribbons or Tape
Secure with double-sided tape or a temporary spray
adhesive.
a Ribbon or tape
b Stabilizer
To Next Page
Loading...
