Baby Lock Solaris VISION BLSA3 - Attaching the Embroidery Frame

ATTACHING THE EMBROIDERY FRAME
32
a
Press the “Presser Foot Lifter” button to
raise the embroidery foot.
b
Align the embroidery frame guide with the
right edge of the embroidery frame holder.
a Embroidery frame holder
b Embroidery frame guide
c
Slide the embroidery frame into the holder,
making sure to align the embroidery frame’s
with the holder’s .
a Arrow mark
d
Lower the frame-securing lever to be level
with the frame to secure the embroidery
frame in the embroidery frame holder.
a Frame-securing lever
■ Removing the Embroidery Frame
a
Raise the frame-securing lever.
b
Pull the embroidery frame toward you.
ATTACHING THE EMBROIDERY FRAME
Note
• Wind embroidery bobbin thread and insert the
bobbin before attaching the embroidery
frame. Check that there is enough thread in
the bobbin.
• Make sure that the frame-securing lever is
correctly lowered after the embroidery frame
has been installed in the embroidery frame
holder.