Baby Lock Solaris VISION BLSA3 - Basting Embroidery

VARIOUS EMBROIDERING FUNCTIONS
88
g
Touch to display the pattern moving
window.
h
Use to align the pattern to the desired
embroidery position.
i
Touch .
j
Press the “Start/Stop” button to start
embroidering.
* Refer to “Embroidering Patterns” on page 50.
 When embroidery is finished, the fabric displayed in
the background disappears.
■ Specify Fabric Display from the
Settings Screen
With the settings screen, the quality of the
background image can be set, or the scanned image
can be deleted.
a Set to [Fine] to scan clearer than setting to
[Standard].
b Touch to remove the background image
completely.
Memo
• The pattern can also be rotated for best alignment
with the scanned background fabric.
• If necessary, touch to display a preview in order
to check the pattern position.
Note
• The fabric will appear in the background until
embroidering of the pattern is finished. In
order to show or hide the background image,
touch , and then set [Background Image]
to [ON] or [OFF].
• To completely remove the background image,
refer to “Specify Fabric Display from the
Settings Screen” on page 88, and then delete
the background image with the settings
screen.
a
b