Baby Lock Solaris VISION BLSA3 - Adjusting Thread Tension

VARIOUS EMBROIDERING FUNCTIONS
90
Basting Embroidery
Before embroidering, basting stitches can be sewn
along the outline of the pattern. This is useful for
embroidering fabric that cannot have stabilizer
material affixed with an iron or adhesive. By
stitching stabilizer material to the fabric, shrinkage
of the stitching or misaligned pattern can be
minimized.
a
Touch .
b
Touch the number to specify the distance
from the pattern to the basting stitching.
c
Touch to return to the previous
screen.
d
Touch , and then touch to
select the basting setting.
 Basting is added to the beginning of the
embroidering order.
e
Press the “Start/Stop” button to begin
embroidering.
f
When embroidering is finished, remove the
basting stitching.
Note
• It is recommended to finish combining and
editing the pattern before selecting the
basting setting. If the pattern is edited after
selecting the basting setting, the basting and
pattern may become misaligned, and the
basting under the pattern may be difficult to
remove after embroidering is complete.
Memo
• The higher the setting, the farther the basting
is from the pattern.
• The setting remains selected even if the
machine is turned off.
Memo
• To cancel the setting, touch .