EasyManua.ls Logo

BabyGo Nova - Page 31

BabyGo Nova
52 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pull the ISOFIX connectors out at the both side of the seat, if it is in the
locked condion, unlock it and the indicators show in green. Aim at the low
anchors at the boom of the seat (E-1, E-2, E-3).
Push the seat unl they are locked, you‘ll hear „click“ „click“ (E-4).
Put the child seat on the vehicle seat, pull ISOFIX connectors out and lock
them on the vehicle anchors at the boom of the seat.
You‘ll hear „click“ and the indicators will turn in green.
Let your child sit in the seat and adjust the height of the headrest, make sure
it won‘t be too high or too low.
Pull the adult seat belts out and feed the diagonal secon of the vehicle belt
through the upper belt guide (E-5, E-6).
Fasten the seat belt across your child. The lap secon should rest on the
lap belt guides on each side of the child seat. Make sure the seat belt is not
twisted (E-7, E-8).
Buckle the adult seat belts to the anchorage of the vehilce seat.
Check the posion of vehicle buckle, ensuring it is not being pulled around
the child seat onto the red belt guide.
Feed the diagonal secon of the adult belt through the upper belt guide on
the opposite side to the buckle.
31
Car Seat + Isox
E- 2
E- 3
E- 4
B-1
C-3
E- 1

Related product manuals