BaByliss PRO FX7880E - Resetting Blade for Regular Use

8
Step 4.
Using the screwdriver, tighten the
tension screws to hold the blade
in place.
Step 5.
Remove the blade from the ad-
justment tool by gently pushing
the blade from the opposite side.
REGULAR - Resetting the blade
for regular use
Step 1
Before placing the blade into the
adjustment tool, use the screwdri-
ver provided to loosen the tension
screws, without removing them
completely from the blade holder.
Place the blade into the adjust-
ment tool in the side marked
Regular.
The tool will automatically push
the moving blade down to its
regular position.
Step 2.
Tighten the tension screws to hold
the blade in place.
Moveable
part