5
TEMPERATURE CONTROL GUIDE
USE
• Plug the curling iron in. The red
indicator light will come on.
• Select the desired temperature
(please see temperature control
guide) using the control wheel.
• Press the button on the right
(I).The red and green indicator
lights will flash until the pro-
grammed temperature has been
reached; only the green light will
stay on.
• After use, press the button on the
left (0) to turn the heat off.
• To reactivate the heat, press the
button on the right (I) again.
• The red light will stay on as long
as the wand is plugged in.
WARNING
The barrel becomes very hot in a
few seconds and should not touch
the skin once the wand is plugged
in. This iron becomes extremely
hot when it is set to the highest
temperature. Always test on a curl
to make sure the setting is appro-
priate for your hair.
CLEANING AND MAINTENANCE
Before removing any hair-product
residues left on the wand:
• Check that the iron is turned o
and unplugged and that it has
cooled.
• Clean the iron using a damp cloth
and non-corrosive detergent or
soap. Before using again, check
that the appliance is dry.
HAIR TYPE SETTING
synthetic 1-3
damaged,
couloured
3-5
fine 6-10
average 10-15
thick 15-20
very curly 21-22
ethnic 23-25
To Next Page
Loading...
