Bacharach MGS-550 - Installation Guide Manual

Corporate Headquarters
621 Hunt Valley Circle
New Kensington, PA 15068-7074, USA
www.MyBacharach.com
help@MyBacharach.com
Page - 1 -
Ireland / Europe
114a Georges St. Lower
Dun Laoghaire, Co. Dublin, Ireland
www.MurcoGasDetection.com
ask@Murco.ie
MGS-550 Duct Mount Kit
Installation Guide
P/N: 1100-1031
August 2016
Revision 0
CAUTION
Any installation of the Duct Mount Kit requires full understanding, knowledge and strict
observance of the Bacharach User Manual (part number 1100-1000).
1 Intended Use
The Duct Mount Kit (part number 6600-8960) is required for mounting the Bacharach MGS-550 to a
duct, if concentrations are to be monitored in ducts.
Round ducts must have a diameter of at least 4" (100 mm). Flat ducts must have a mounting area of
at least 6.7" x 6.7" (170 x 170 mm). The required head space for calibration is a minimum of 4”
(100 mm) for sliding up the instrument.