17
4.2 Operation
ON / OFF “Switch on/off sensor” for approx. 3-5 seconds by pressing the button. The battery status
LEDs flash until the current charge level is determined.
The battery status LEDs indicate the available energy
After approx. 15 minutes without a plug (device), the MOV:E Power Unit switches off automatically.
As soon as a plug (device) is plugged in, the connected device is supplied with power.
Open the connection panel by pressing and turning the cover.
4.2.1 Connection options item no. 702.5000, 702.5001
1x CEE7/3; 230 VAC 150 watt
2x USB-A each 15 watt
2x USB-C each 60 watt
To Next Page
Loading...