Height Adjustment
Button
www.GetBack2Life.com
15
Your 12 Minute Back Pain Solution
Putting the Machine Together
1.) Lay Back2Life’s main body on the floor with the
height adjustment button facing you.
2.) Insert the right leg, with the blue R on it, into the
right hand slot, which also has an R on it. Then slide
the leg upwards in the slot. Press firmly until it snaps
into place. Do the same for the left leg.
3.) Place Back2Life’s main body standing on a firm
surface with the height adjustment button facing you.
4.) Hold the leg rest with the high adjustment window
facing you. On the bottom of the leg rest you will see
4 pins. Insert the 2 pins furthest from you into the 2
rear slots on the main body. Then press the leg rest
firmly downwards and towards you until you hear a
click. The height adjustment button should click into
its slot. (Once the leg rest is assembled, do not try to
remove it from the main body.)
Direction for
application of
pressure
1
2
3
4
To Next Page
Loading...