62
CLIMBING ROPEACCESSORIES
Feed top of Climbing Rope through front of
Upper Rail (2968-CC) and tie a double knot
on the back side (Fig. 1).
For Safety, insure that the rope is
tight enough so that it can not be
looped back on itself.
Feed lower end of Climbing Rope through
hole in Rock Wall board (2974-CC) and tie a
double knot on the back side (Fig. 1).
Keep tying double knots at the
bottom end of rope until there is
no remaining loose rope.
Do not cut ends of rope.
Step 1
Step 2
OPTIONAL:
Tie several single knots in
locations to allow logical
hand-grab points.
Fig. 1
2968-CC
2974-CC
To Next Page
Loading...