x2
3/8 x 2 x 68-3/4" (0,9 x 5,1 x 174,6 cm)
x1
3/8 x 2 x 69-1/4" (0,9 x 5,1 x 175,8 cm)
x1
3/8 x 2 x 69-1/4" (0,9 x 5,1 x 175,8 cm)
51
BACK CORNER TRIM
PARTSREQUIRED:
x24
2" (5,1 cm)
BEGIN
1
Place68-3/4" back corner trim ush to bottom of back soft board (Fig.A,B,F)
and ush with side panel along the length (Fig.A). Attach using (6) 2" nish nails
into corner wall framing (Fig.A,C). Space nails equally (Fig.C).
You have attached your back corner trim.
4
Repeat for other side.
3
2
FINISH
Fig.C
68-3/4"
(174,6cm)
69 -1/4"
(175,8cm)
(AngledEndup)
Place69-1/4" back side corner trim angled end up (Fig.E) ush up under side soft
panel and ush with back corner trim along the length (Fig.E). Attach trim using (6)
2" nish nails into corner wall stud (Fig.D,C). Space nails equally (Fig.C).
Fig.D
Fig.E
2"Nail
69 -1/4"
(175,8cm)
AngledendFlush
atsoft.
Flushwithback
cornertrim.
Seamisush.
Caulkseambefore
paintingtrim.
Fig.A
Fig.B
68-3/4"
(174,6cm)
2"Nail
Flushwith
sidewall
panel.
Flushattop
BACKOF
SHED
Fig.F
Flushat
softboard.
2"x68-3/4"
CornerTrim