Backyard YardLine ASTON - PAINT & CAULK; ROOF FELT; DRIP EDGE

To Next Page

To Previous Page

• Use acrylic latex caulk that is paintable. Caulk at all horizontal and vertical seams, between the trim and walls, and all

around the door trim.

• Use a high quality exterior acrylic latex paint. When painting your building, there are a few key areas that can be easily

overlooked that must be painted:

• Bottom edge of all siding and trim

• Inside of doors and all 4 edges

Note:

Prime all un-primed exterior wood before painting.

(Follow directions provided by manufacturer.)

Youmustinstalldripedgetovalidatewarranty.

PAINT & CAULK

- NOT INCLUDED -

ROOF FELT

- NOT INCLUDED -

DRIP EDGE

- NOT INCLUDED -

• Install felt ush to all roof edges overlapping 3". Use minimal amount of roong nails to hold in place.

3"OVERLAP

Flush

Youmustinstallrooffelttovalidatewarranty.

DripEdge

ushtotrim.

• Install drip edge over roof felt on side of shed and under roof felt on back side (Fig.A).

• Do not use nails on side of drip edge that hangs over side of building.

• Only nail top of drip edge as shown.

RoofFelt

DripEdge

Fig.A

BACK

OF

SHED

SIDE

OF

SHED