40BW-202010
1
-
21
CHAPTER 1 GENERAL INFORMATION
1
4025H/4035H/4035CH TRACTOR
(16.) No.: TZE5160000B3
TO AVOID PERSONAL INJURY:
1. Read and understand the operator’s manual before operation
2. Before starting the engine, make sure that everyone is at a safe distance from the
tractor and that the PTO is OFF
3. Do not allow passengers on the tractor at any time.
4. Before allowing ohterpeople to use the tractor, have them read the operator’s manual.
5. Check the tightness of all nuts and bolts regularly.
6. Keep all shields in place and stay away from all moving parts.
7. Lock the two brake pedals together before driving on the road.
8. Slow down for turns, or rough roads, or when applying individual brakes.
9. On public roads use SMV emblem and hazard lights, if required by local traffic and
safety regulations.
10. Pull only from the drawbar.
11. Before dismounting lower the implement, set the parking brake, stop the engine and
remove the key.
TZE560000B3
75IH=CB
(15) No.: TZE5140000B3
BEFORE DISMOUNTING TRACTOR:
1. PARK ON LEVEL GROUND WHENEVER POSSIBLE.
If parking on a gradient. position tractor at right angles
to the slope.
2. ALWAYS SET PARKING BRAKE.
Leaving transmission in gear with the engine stopped will
not prevent tractor from rolling.
3. LOWER ALL IMPLEMENTS TO THE GROUND.
Failure to comply to this warning may allow the wheels to
slip. and could cause injury or death.
4. LOCK SHUTTLE SHIFT LEVER IN NEUTRAL
POSITION AND STOP THE ENGINE.
TZE5140000B3
WARNING
To Next Page
Loading...
Need help?
General
