Bad Boy 40 Series User Manual

40BW-202010
1
-
44
CHAPTER 1 GENERAL INFORMATION 4025H/4035H/4035CH TRACTOR
8.2.11 REPLACING TRANSMISSION/
HYDRAULIC FILTER
1. Removethelterelement(1)byunscrewingit.
2. Applyclean oilontothe sealringofanewlter
elementandtightenthislterelement.
3. Starttheengineandcheckthelterbaseforfuel
leakage.
4. Stop the engine and check the oil level. If the
level is too low, add more oil.
CAUTION

      -
ter the engine is stopped and cooled down.

          
keep the transmission intact.
F42W122A
8.2.10 REPLACING HST FILTER
1. Turn the filter element (1) counterclockwise to
remove.
2. Apply a clean oil around the seal ring of element
ofanewlterandtightenit.
3. Start the engine and check oil leakage after
operate forward and reverse.
A42W110A

Bad Boy 40 Series Specifications

General

Brand	Bad Boy
Model	40 Series
Category	Tractor
Language	English