EasyManuals Logo

Bad Boy MZ User Manual

Bad Boy MZ
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
3.9 Increase RPM by sliding the throttle to fast position, toward the rabbit.
3.10 Owners must become familiar with the controls before operating a zero-turn radius vehicle.
3.11 Start slowly and build your skill level. Have ample practice before using the machine at full
capabilities.
3.12 Be comfortable with machine before engaging blades. Know what each component controls
before using machine.
3.13 Your mower will perform differently on an incline /decline. Be cautious, slow down, and do
not make any sudden jerking movements with control arms. The machine could lose traction
on a decline or tip backwards on an incline.
3.14 Once you become comfortable with your Bad Boy Mower you will notice your overall mowing
time will decrease.
SECTION 4: MOWER MAINTENANCE
**Check each and provide maintenance when needed.
DAILY
4.1 Check Engine Oil
4.2 Check Engine Air Filter
4.3 Tire Pressure
4.4 Radiator Screen (Screen should be cleaned frequently during heavy use)
4.5 Radiator Anti-Freeze
4.6 Inspect Blades
EVERY 30 HOURS OF USAGE
4.7 Grease Machine
EVERY 100 HOURS OF USAGE
4.8 Check All Filters
Check filters once a year if under 100 hours
Check air and fuel filters more often in dry, dusty conditions
EVERY 100 HOURS OF USAGE
4.9 Change Hydraulic Fluid
4.10 Refer to manufacturer manual for specific information on maintenance schedules.
PAGE 7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bad Boy MZ and is the answer not in the manual?

Bad Boy MZ Specifications

General IconGeneral
Deck MaterialSteel
Cutting Width54 in
Deck Thickness10-gauge
Cutting Height1.5 - 4.5 inches
Warranty3-year / 300-hour (residential), 1-year / no-hour limit (commercial)

Related product manuals