The wire colors in the drawing are used for reference only based on the colors we use on our module. When installing the hard-
wired ATS-03 on a factory model, be sure to consult your bikes service manual for exact wiring diagrams and color descriptions
to achieve proper installation.
FITMENT: Here is the list of Badlands Automatic Turn Signal Self Canceling Modules and the fitment description for each part
number.
ATS-03: Hard-wired module, universal fitment, comes complete with (1) 1/4” ring terminal for the BLACK wire to ground to the
frame or directly to the battery post, (1) quick splices (or butt connector) for RED/YELLOW wire on the module for 12+ volt
switched power and (5) butt connectors for right and left turn signal inputs and outputs.
ATS-03-A: Plug-n-Play module, fits (’87- ‘93 FLH, ’90-’93 FX, ’92 & ‘93 XL) This module comes with a 6-position male OEM
Mate-n-Lock connector that plugs directly into factory wiring harness in place of the factory flasher module.
ATS-03-B: Plug-n-Play module, fits (all ’94 - ‘99/2000 models (Until Delphi TSM system.) This module comes with an 8-position
male OEM Deutsch connector that plugs directly into factory wiring harness in place of the factory flasher module.
ATS-03-C: Plug-n-Play module, fits (all ’94 - ‘99/2000 models (Until Delphi TSM system.) This module comes with a 12-position
male OEM Deutsch connector that plugs directly into factory wiring harness in place of the factory flasher module.
To Previous Page
Loading...