BAIC BJ 2021 Series - Page 127

Seat and storage facilities
125
2
Backrest lumbar adjustment (only for driver
seat):
Pull the adjustment handle up and down -4- to
increase the lumbar support; press the
adjustment handle down and down to lower the
lumbar support.
Caution
● After adjusting the seat position, try
sliding the seat back and forth to ensure that
the seat is locked in place.
●
Push the upper part of the seat back back
and forth to ensure that the seat back is
securely locked, otherwise it may interfere
with the normal operation of the seat belt.
●
Do not place objects under the driver's or
front passenger's seat. Otherwise, the seat
lock mechanism may be affected or the seat
position adjustment lever may be pushed up
accidentally. The seat may suddenly move
and cause the vehicle to be easily driven. out
of control.
Caution
●The seat position set by the manufacturer:
the front and rear adjustment stroke is
240mm, the seat design position can be
adjusted forward 200mm, rearward
adjustment 40mm; the driving seat design
position can be adjusted upward 20mm
downward
adjustment 25mm; front row
back design The angle is 22°, the design
position can be adjusted backward by 50°,
and the forward adjustment is 25°; with the
4-
way adjustment headrest, it can be
adjusted back and forth for a total of 3 steps
of about 26mm.
Warning
●Never adjust the seat while the vehicle is
moving, as the seat can move unexpectedly
and cause the vehicle to lose contro
●
Do not let the seat hit the occupants or
luggage when adjusting the seat.Seat and
storage facilities