ESP OFF Function
Transfer case 2H: it is at default that ESP
function is on.
Press ESP OFF button to switch off ESP
function, and the ESP OFF indicator light
on the combination instrument will be on.
Press ESPOFF button again to start ESP
function, and the ESPOFF indicator light
on
the combination instrument will be off.
Caution
● Transfer case 4H/4L,Press ESP OFF
button fleetly
3s
It is only for switching
off ESP and Torque Control with
TCS ,Retain other functions.
● Transfer case 4H/4L,Press ESP OFF
button for a long time (3s-10s),It is only for
switching off ESP
functions.
Transfer case 2H:Press ESP OFF button
10s.It is only for switching off ESP and
TCS,Retain other functions.
When switching off the ESP function by
pressing ESP OFF button, the ESP function
will be automatically restored and the ESP
OFF indicator light becomes off when the
vehicle is driving at speeds above 80km/h.
Transfer case 4H/4L: ESP OFF indicator light
is automatically on, indicating that the ESP
system is in partial functional state, including
ABS, EBD, TCS, HHC, HBA and HDC. Hill
descent function. While ESP system is in
service, ESPOFF indicator light is off and ESP
indicator light flashes.
Warning
Electronic Stability Program (ESP) only
provides limited control on stability of the
vehicle during driving, so even when the
vehicle is equipped with ESP, you must
adjust your driving method at any time
depending on the road conditions and traffic
situation. This is especially important for
driving on smooth and wet pavements. To
eliminate possibility of accidents, don’t take a
risk to drive even though the driving safety is
improved with this system.
To Next Page
Loading...