Polishing
Polishing is needed only when the body paint
color fading and even waxing materials cannot
deliver good gloss. If the polishing agent does
not contain anti-corrosive ingredient, waxing is
necessary after polishing.
Caution
Lusterless parts and plastics cannot be
treated with polishing agents or hard wax.
Body Paint Damage
Slight body paint damage (such as scratches,
scrapes or stone striking marks) should be
covered with body paint before steel rusting.
If rusted, the rust must be thoroughly removed.
In addition, the rusted portion must have an
anti-corrosive base paint and a covering paint
spread over it. All such work must be done at an
authorized BAIC dealership.
Cleaning and Maintenance of
Exterior Plastic Parts
Usually, exterior plastic parts can be cleaned
using water, a soft cloth or soft brush.
Otherwise use cleaning agent without solvent
for plastic parts.
Caution
Do not use solvent containing cleaning
materials when cleaning plastic parts, or it
will easily cause damage to plastic parts.
Maintenance of Chromium-Plated
Parts
Chrome plated parts can be cleaned with a wet
cloth and then wiped with a soft dry cloth. If the
effect is not good enough, can use chromium
maintenance agent..
Stains and the dirt layer on chromium-plated
parts can be cleaned using a chrome
maintenance agent. Regularly using a chrome
maintenance agent can prevent the formation of
a dirt layer on the surface. When a chrome
maintenance agent is used, be sure to cover
evenly the entire surface.
To Next Page
Loading...