The vehicle tool kit includes:
1. Jack-use wrench
2. Jack-use wrench extension rod
3. Wheel assembly dismantling wrench
4. Front windshield fixing strap
5. Front windshield fixing strap’s fixing ring
6. Key to wheel lock
Warning
●Improper use of the jack may cause serious
injuries.
The jack can only be used on a hard and
flat surface.
The jack can only be used for replacing the
wheels of this vehicle. It cannot be used to lift
other heavy objects or vehicles.
When the jack is used, be sure to NOT
start the engine. Otherwise, it will
cause accidents.
When using the jack to lift the vehicle, be
sure to remember that you must not put any
part of your body under the vehicle(to
prevent accidents).
If it is indeed needed to operate under the
vehicle, a suitable protective support must be
placed under the vehicle.
Caution
After use, the jack must be put back to its
original place. Also pay attention to the
supporting angle of the jack and ensure that
the jack can be put into the installation box.
Warning
● Follow the specified tightening
torque to correctly tighten the wheel nuts.
Otherwise, when the vehicle is driven, the
nuts may become loose, thus increasing the
chance of traffic accidents.
● When the wheel assembly dismantling
wrench provided along with the vehicle is
used to fasten the wheel nuts but it is not
possible to guarantee the torque value,
rationally control vehicle speed when driving,
avoid sudden acce
leration and emergency
braking and go to a specialized place to
calibrate and ensure that the wheel nuts
reach the required tightening torque.
The wheel nut toque is: 130±5Nm。
To Next Page
Loading...