Installing
1. Slightly push up the headrest behind the child
seat.
2. Run the top fastening cord through the
headrest or, depending on the child seat
construction, put the top fastening cord on both
side of the headrest, and then pull the top
fastening cord backwards towards the back of
the rear seat.
3. Press the ISOFIX child seat into the fixing
ring in the front part of the seat until a
distinctive engagement sound is heard from the
child seat.
4. Pull the two sides of the child seat and check
whether it is firmly engaged.
5. Engage the ISOFIC fastening ring (in the
position indicated by the arrow in the figure) of
the top fastening cord and the top fastening cord
hook of the rear seats.
6. Tighten the top fastening cord so that the
child seat closely fits the back rest of the rear
seat.
Warning
●The ISOFIX fixing ring on the back of the
rear seats can only be used for the ISOFIX
system.
● Do NOT connect fastening belts,
non-ISOFIX child seats or any other items to
the fixing ring.
● Only one top fastening cord can be
connected to the rear fixing ring on the back
of the rear seat. No other cords (such as
luggage fastening cords) are to occupy this
To Next Page
Loading...