Replace the key battery by following steps
：
1. Insert sharp tools into the hole at the bottom
of the Remote control key.
2. Unlock the key battery lock, up open the
battery cover
3. Remove batteries to avoid contact with circuit
boards and battery clamps
4. Avoid touching the surface of battery and
wipe them clean before installation when
installing battery.
5. Installation should ensure that the battery
cover meshes well and avoid dust and water
vapor entering.
6. After replaced, it is necessary to test whether
the function of the Remote control key is
normal. If the Remote control key still does not
work properly, please contact authorised
dealership.
To Next Page
Loading...