Rear top cover
The rear roof cover of the car can be
disassembled, but it can only be achieved by
special tools. If encounter problems in operation,
consult the professional staff of the authorised
dealership.
Detailed disassembly steps are as follows:
1. Pull the interior parts in the rear area of the
vehicle and unscrew the nuts as shown in the
figure (1 left and 1 righ
）
.
2. Remove the bolts (3 bolts) on the left rear
circumference as shown in the figure-arrow.
3. Remove the bolts (3 bolts) on the right rear
circumference as shown in the figure-arrow.
To Next Page
Loading...