4. Remove the beam interior panel above the
windshield as shown in the figure. -1-
Caution
The beam interior panel on the windshield is
fixed by 10 fasteners, and the fastener is a
disposable part. New parts need to be
replaced after disassembly.
5. Release the A-pillar speaker plug
First remove the A-pillar trim on both sides, and
then release the icon plug (take the right side of
the vehicle as an example)
Caution
The beam interior panel on the windshield is
fixed by 10 fasteners, and the fastener is a
disposable part. New parts need to be
replaced after disassembly.
6. Loosen the antenna plug of the front
windshield, which is located in the dashboard
on the passenger side.
First remove the glove box: Open the glove box
and slowly pull out the glove box in the
direction of the arrow shown.
To Next Page
Loading...