Find the antenna plug of the front windshield
and loosen it according to the graphic method
(the plug is inside the glove box).
7. Remove the fastening bolts connecting the
front windshield with the left and right anti-roll
bars. There are 3 fastening bolts on each side,
total 6 bolts. (Take the right side of the vehicle
as an example).
Caution
These bolts are installed with a torque
requirement of 24 +2Nm.
8. Remove wiper arm
Open the wiper arm nut cover along the arrow B
shown in the figure, and remove the fixed nut -
arrow A-. Both wiper arm retaining nuts need to
be removed
(The right side as an example)
Caution
The requirement torque of fixed wiper arm
nut is 19±NM
To Next Page
Loading...