EasyManua.ls Logo

BAIC BJ40 - Page 26

BAIC BJ40
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Airbag System
1
Airbag Repair, Maintenance and
Scrapping
Components of the airbag system are installed
in different positions around the vehicle. All
operations of the airbag system or operations
that require the removal of airbag system
components to allow the repair of other vehicle
components must be performed by an
authorized BAIC dealership. Otherwise, the
airbag system may be damaged. As a result, in
the event of an accident, the system may
abnormally trigger the airbag or fail to trigger
the airbag at all.
When scrapping the entire vehicle or airbag
components, be absolutely sure to follow the
relevant safety regulations. Authorized BAIC
dealerships which are familiar with the relevant
safety regulations may provide you with an
enquiry service.
Warning
If repairs are not carried out by specialized
technicians at an authorized BAIC
dealership, the potential risk of injuries is
increased. This is because the system may not
trigger the airbag or trigger it when it is not
needed in the event of an accident, thus
serious injury or even death may be caused
to passengers.
Do NOT paste anything or cover the
steering wheel or the soft plastic surface of
the dashboard of the frontal passenger-side
airbag assembly, or attempt to make any
refitting to any of the above positions.
Do NOT install devices such as a cup
holder or telephone bracket on the airbag
assembly casing.
Do NOT fix items such as notepads or
telephone brackets on the windscreen above
the front passenger-side airbag. Otherwise, if
the front passenger-side airbag is triggered,
these items may fall and cause injuries to
driver and passengers.
Warning
When cleaning the steering wheel or the
dashboard, only use a dry or damp cloth. Do
NOT use a solvent-containing cleaning agent
to clean the surface of the dashboard or the
airbag assembly. This is because solvents can
cause the loosening of these components.
When the airbag is triggered, broken plastic
may cause serious injuries.
The airbag system can only be triggered
once, and all triggered airbags must be
replaced.
Do NOT try to repair, remove or install
any of the airbag system components on your
own.
All operations on the airbag or all
operations to remove the airbag required for
the repair of other vehicle components (such
as the steering wheel) must be performed by
an authorized BAIC dealership. This is
because authorized BAIC dealerships are
equipped with special tools, repair
documents and qualified specialist
technicians.

Related product manuals