EasyManua.ls Logo

BAIC BJ40 - Page 84

BAIC BJ40
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
82
Open and Close Doors
2
Manipulating central door lock with remote
control key
Press the lock key of the remote control key. If
the vehicle meets the lock condition, the central
door lock system will be locked, the whole
vehicle‘s door will locked.
Press the unlock key of the remote control key.
If the vehicle meets the unlock condition, the
central door lock system will be unlocked, the
whole vehicle‘s door will unlocked.
Manipulating central door lock with
Mechanical key
When the vehicle meets the lock condition,
insert the key into the driver's side door lock
hole and Rotate back to the vehicle(Clockwise)
the central door lock system is unlocked; Rotate
the key in the front (counterclockwise) direction
of the car
doors are locked.
The central door lock button is located on the
driver's side door as shown in the figure.
Press the button-1-, the central door lock system
is unlocked, press the button-2-is locked. The
behavior of unlocking/lock the door by
mechanical key only applies to the
corresponding door lock, and can not control all
the doors at the same time.
Manipulating the central door lock with the
switch on the driver's side door
Equipped vehicles only
The switch is located on the driver's side door.
Pull the central door lock switch - 1 -, the
central door lock system will be unlocked, and
press back inwards will be locked.

Related product manuals