Vehicle Lights and Vision
Intermittent Wiping Frequency
Turn the right control handle end position
①
as
shown in the figure to control the intermittent wiping
frequency of the front windshield wiper. Turn it
upward (clockwise) to decrease the frequency, and
turn it downward (counterclockwise) to increase the
intermittent wiping frequency.
● It is prohibited to use the wiper when the
windshield is dry.
● In cold or hot conditions, ensure that the
wiper blade is not frozen/bonded or fixed to
the windshield before operation.
● In winter, remove snow and frost from wiper
arm and wiper blade, including areas
involved in wiper blade operations.
Back windshield wiper
The figure shows the control unit of the rear
windshield wiper. It is located on the right multi-
functional operating lever. This unit includes the
following switch positions:
1. Rear windshield washing
When the control handle is rotated to position
①
, the
windshield cleaning agent will be sprayed to the back
window by the back window cleaning nozzle, and
then the back window wiper will automatically cycle
and sweep for several times. When released, the
control ring will automatically reset.
To Next Page
Loading...
