● Seven seats and three rows: the backrest
angle is 20°, it can be unlocked by the
backrest unlocking strap handle, and the
backrest can be folded forward.
● Never adjust the seat when the vehicle is
running, as the seat may move accidentally
and cause the vehicle to get out of control.
● When unlocking the backrest handle, the
back of the driver or the front passenger
shall not leave the backrest, and shall not
lean forward too fast to avoid accidents.
● Do not make the seat hit the passengers or
luggage when adjusting the seat.
Driver's seat welcome*
You may turn on / off the function through
Infotainment screen > > Vehicle Settings >
Driver‘s Seat Welcome.
After the function is turned on, the Start/Stop button
switches to the "OFF" mode. After opening the
driver's side door, the driver's seat moves back to
facilitate the driver's entry and exit. After the
Start/Stop button is switched to "RUN" mode or
vehicle lock, the driver's seat returns to the position
before reversing.
Seat adjustment position memory
function *
Set the driving position:
1. Adjust the driver’s seat and side mirror to the
desired position.
2. Press the SET key, and then press any of the
memory position buttons 1, 2 or 3 within about 5
seconds for about 1 second. The position is
memorized successfully and a prompt interface
appears on the instrument.
If the above operation is carried out again, when any
button ("1", "2", or "3") is pressed, the previously
recorded position of any button will be overwritten
with the current position.
To Next Page
Loading...
