BAIC BJ60 Series - Third-Row Seat

Seats and Storage Facilities
129
1
2
3
4
5
6
7
8
Access to the Third-row Seat
1. Pull the unlocking handle on the upper right of the
second-row backrest to the unlocking position.
Fold the second-row right-side backrest forward,
and then push it forward to the forefront. You can
enter or leave the third-row seat at this time.
2. After passengers enter or leave the vehicle, first
turn the right backrest of the second row
backward to the use position, then push the seat
backward to the seating position and make sure it
is locked securely.
Third-row Seat
Hint
● For vehicle equipped with seat belt retaining
clips, attach the seat belt to the retaining
clips when not in use, so as not to affect the
seat adjustment and backrest folding.
● Before folding, please adjust the second-row
backrest to a proper angle to avoid affecting
the folding of the seat.
Seat folding
1. Lower all headrest to the lowest position before
folding the seat.
2. Pull the unlocking handle at the rear of the
backrest to the unlock, and then push the backrest
forward to fold the third-row seat and reset the
unlocking handle.