● For the first-order and second-order gear shifting
by pushing forward or backward, when it is
pushed to the first order and the gear shifting
conditions are met, the automatic transmission
will engage the adjacent first gear position
according to the gear prompt on the gearshift
handle. When it is pushed forward or backward to
the second step and the gear shifting condition is
met, the automatic transmission will engage the
adjacent second gear position according to the
gear prompt on the gearshift handle. If there is no
adjacent second gear position, it will engage the
adjacent first gear position, and if there is no
adjacent first gear position, the current gear
position will remain unchanged.
Unlock (UNLOCK) button:
● The button at the front of the gearshift handle is
the UNLOCK button, which should be pressed
when the handle is moved out of the "P" position
or put into the "R" position; if not, the operation
might fail.
P button:
● The button with "P" character behind the gearshift
handle is the "P" position button. When the
vehicle is completely stopped, press the "P"
position button to put the automatic transmission
into the "P" position directly from any gear.
"P" position (parking gear):
● After the vehicle is completely stopped, press the
brake pedal to the bottom or pull up the parking
brake, and press the "P" button to shift the
automatic transmission into "P" position. The
internal drive gear of the transmission is stuck.
● Because this model is an electronic gear shifting
mechanism, in order to ensure safety, the
transmission has a locking structure that switch to
the "P" position (when the vehicle is powered off
and turned off, the automatic transmission will
switch to the "P" position). Therefore, the
automatic transmission will also switch to "P"
position in the following cases:
1. When the vehicle is stopped, the automatic
transmission is in any gear position of R/N/D/M,
and the engine is turned off;
2. When the brake pedal stop is pressed and the gear
R/N/D/M is engaged, the driver door is open, and
the brake pedal is released.
● As the transmission of this model has a locking
mechanism that switches to the "P" position, the
gear can be shifted from the "P" position to other
gear positions only when the brake pedal is fully
pressed, the vehicle is started, the unlock button
of the gearshift handle is pressed, and the shift
handle is pushed forward or backward to the 1st
or 2nd position.
To Next Page
Loading...
